Revision History - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
01 May 2000
02 December 2000
03 September 2001
04 October 2002
05 April 2003
06 December 2003
07 August 2004
08 February 2005
09 November 2005
10 July 2006
11 November 2007

Revision History

Cat. No. W372-E1-13
Date
Original production
CX-Process Tool version changed from 1.50 to 2.00. The manual has been up-
dated for this version change as summarized in section 1-2-3.
CX-Process Tool version changed from 2.00 to 2.50. The manual has been up-
dated for this version change as summarized in section 1-2-4 and the following
information has been added (major changes only).
Page 18: Lists of function blocks and ITEMs incompatible with earlier versions
Page 20: Explanation of new dialog box used to select communications driver
Page 23: Explanation of CX-Server connections
Page 44: Explanation of CX-Server installation
Page 66: Explanation of PLC type, CPU type, and network type selection
Page 76: Explanation of annotations (comments) in function blocks
Page 96: Explanation of the automatic conversion between mnemonic code
and ladder diagram formats
Page 100: Explanation of annotations (comments) in ladder diagrams
Page 131: Explanation of initial settings required when using CX-Server
Page 133: Explanation of initial settings required when using a Peripheral Bus
connection
Page 154: Explanation of downloading individual ITEM settings
Page 162: Explanation of the online tuning function
CX-Process Tool version changed from 2.50 to 3.00. The manual has been up-
dated for this version change as summarized in section 1-4-5.
CX-Process Tool version changed from 3.0 to 3.1. The manual has been updated
for this version change as summarized in section 1-4-6.
CX-Process Tool version changed from 3.1 to 3.2. The manual has been updated
for this version change as summarized in section 1-4-7.
CX-Process Tool version changed from 3.2 to 4.0. The manual has been updated
for this version change as summarized in section 1-4-8. The safety precautions
have also been changed and new precautions added. Terminology used to refer
to the Loop Control Units and Boards has been changed, with an explanation pro-
vided at the beginning of the manual.
CX-Process Tool version changed from 4.0 to 4.1. The manual has been updated
for this version change as summarized in section 1-4-9. Minor corrections have
also been made.
CX-Process Tool version changed from 4.1 to 5.0. The manual has been updated
for this version change as summarized in section 1-4-10. Minor corrections have
also been made.
CX-Process Tool version changed from 5.0 to 5.1. The manual has been updated
for this version change as summarized in section 1-4-11. Minor corrections have
also been made.
The CX-Process Tool version has been changed from 5.1 to 5.2. The CX-One ver-
sion has been changed to 2.1. Loop Controller functions have been improved.
The manual has been updated for these changes as summarized in 1-4 Version
Improvements.
Revision code
Revised content
339