Version 3.1; Version 3.2 - Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual

Version Improvements

1-4-6 Version 3.1

Item
Unit/Board support
Data conversion
CSV tag settings
Backup during operation

1-4-7 Version 3.2

Item
User-defined block
RS View tag files (.csv)
OPC server direct access tag output
HMI memory map CSV output
Tuning screens
Multiple screens
Data logging (saved to
CSV file)
Setting of number of communications
retries
Sequence table q Online editing
Displaying PV and
changing set value for
timers and counters
20
The improvements made from version 3.0 to version 3.1 of the CX-Process Tool
are listed in the following table.
Ver. 3.0
CS1W-LC001 Loop Control Unit and
CS1W-LCB01/05 Loop Control
Boards
Conversion from LCU element to LCB
element data
Manually only (making settings
individually in the CSV Tag Settings
Dialog Box)
Not supported.
The improvements made from version 3.1 to version 3.2 of the CX-Process Tool
are listed in the following table.
Ver. 3.1
Not supported.
Not supported. (The
CSV tag file must be
imported to an OPC
server and then the RS
View tag file (.csv) has to
be created manually.)
Not supported.
Not supported.
Not supported. (Only
one screen can be
open.)
Not supported.
Not supported.
Not supported.
Not supported.
Ver. 3.1
CS1D-CPUjjP Process-control
CPU Units (in addition to
CS1W-LC001 Loop Control Unit and
CS1W-LCB01/05 Loop Control
Boards)
Conversion of data created for the
CS1W-LCB05 to CS1D-CPUjjP
Process-control CPU Unit (in addition
to conversion from LCU element to
LCB element data)
Automatically creating CSV tag
settings when registering function
blocks (CSV tag setting function) and
editing in Excel or other editor before
loading to the project (in addition to
manual setting)
Supported.
Ver. 3.2
Supported. (Registers a group of function
blocks as a single user-defined function block.)
Supported. (The RS View tag file (.csv) can be
automatically and directly generated.)
Supported.
ITEMs other than HMI data can be output for
OPC server direct access when the CSV tags
are compiled. (Applies only to the following:
Ramp Program (Block Model 155), Segment
Program (Block Model 156), and Segment
Program 2 (Block Model 157).
Supported.
The allocations of HMI memory can be output
to a CSV file. The file shows which words in the
EM Area are allocated to tags and tag ITEMs.
Supported. (Up to four screens can be open.)
Supported. (Logging is started when the tuning
screen is opened and continues until the tuning
screen is closed.)
Supported.
Supported.
Supported.
Section 1-4