Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 113

Overview of User Interface
Edit User Link Table Mode Menus
Pop-up Menu (Displayed by Right-clicking)
Pop-up menu command
Add
Block Set
Move
Arrange Number
Edit
Selected
Extension
Delete
Selected Entries
No Connection
Delete Registered Entry
Update
Selected Entries
Refresh e es
Cycle C
All Entries
Find
Transfer Selected Entries
to LC o C
All Entries
86
Description
Adds a tag to the user link table. The User
Link Table Edit Dialog Box will be
displayed.
Adds multiple tags to the user link table
(adding serial numbers to the file name).
Increases the entry numbers for the
specified entry and all entries lower than it
by an increment of 1.
Reassigns all entry numbers in ascending
order. (This is not a reordering function.)
The reference for the related function
blocks is also automatically changed by
this operation.
Edits the basic data in the user link table.
Edits the extension data in the user link
table.
Edits the selected user link table tag.
Deletes all tags from the user link table.
Deletes the CX-Process Tool entry and the
entry stored in the LCB at the same time.
Sets the refresh cycle for the tags selected
in the user link table.
Sets the refresh cycle for all tags in the
user link table.
Finds tags that match or contain the
specified text. Perfect matches or
considering case can be set before
searching.
Downloads the selected tags in the user
link table to the Loop Controller.
Downloads all tags in the user link table to
the Loop Controller.
Section
Conditions for selection
---
---
When a line of tag data is selected
When a line of tag data is selected
When a line of tag data is selected
When a line of tag data is selected
When a line of tag data is selected
---
When a line of tag data is selected
When a line of tag data is selected
---
---
When a line of tag data is selected
---
2-2