Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 167

Using the CX-Process Monitor Plus
Download Function
Block Data to Loop
Controller.
Compile Monitor Tag
Files.
1, 2, 3...
140
2. Click the OK Button. Compilation of CSV tags and CX-Process Monitor Plus
tags will begin. The following message will be displayed if compilation ends
normally.
Note If a CX-Process Monitor Plus tag file is output while the CX-Process Monitor Plus
is running, the following dialog box will be displayed.
Even if a CX-Process Monitor Plus tag file is output while the CX-Process Moni-
tor Plus is running, the tag information will not be updated. To update the in-
formation, restart the CX-Process Monitor Plus.
Download the function blocks.
The monitor tag file is generated by compiling the CX-Process Monitor tag file
that was generated. The compilation process will automatically created the
monitor tag files in the following folder.
Folder: Omron\CX-Process Monitor Plus\db (The underlined portion is the
installation folder of the CX-Process Monitor Plus.)
File names: mtagmst and mtagsubmst
1. Start the CX-Process Monitor Plus by selecting Program - OMRON – CX-
Process Monitor Plus - CX-Process Monitor Plus from the Windows
Start Menu.
2. Click the Start Button. The monitor tag file will be compiled.
Section 3-3