Omron CX-PROCESS TOOL V5.2 - 12-2009 Operation Manual page 254

Setting Options
The following example shows designating the source (i.e., the connection data)
for a function block.
Tag name, field terminal, sequence control will be
selected. The connection data can be selected
from the tag name/tag ITEM name pull-down lists.
When this option is not selected, ITEMS are specified by inputting the block ad-
dress followed by the ITEM number as a continuous series of numbers
(BBBBIIII) for the following.
• For the source designation (connection data designation) for a function block
• When Edit – Edit Connection is selected after right-clicking an ITEM dis-
played in blue
• When editing signals in sequence tables
• When editing symbols in step ladder diagrams
The following example shows designating the source (i.e., the connection data)
for a function block.
Block address/ITEM number will be selected. The connection
data is specified by inputting the block address followed by the
ITEM number as a continuous series of numbers (BBBBIIII)
Section 3-12
227