Service Maintenance Procedure; Recommended Tools; Cleaning - Xerox Phaser 6130 Service Manual

Cleaning and Maintenance

Service Maintenance Procedure

Recommended Tools

Cleaning

7-2
Perform the following procedures whenever you check, service, or repair a
printer. Cleaning the printer, as outlined in the following steps, assures proper
operation of the printer and reduces the probability of having to service the
printer in the future.
The frequency of use, Average Monthly Print Volume (AMPV), type of media
printed on, and operating environment are factors in determining how critical
cleaning the machine is and how often it is necessary. Record the number of
sheets printed.
Toner vacuum cleaner
Clean water
Clean, dry, lint-free cloth
Black light-protective bag
Perform the following general cleaning steps as indicated by the printer's
operating environment.
Caution
Never apply alcohol or other chemicals to any parts of the printer. Never
use a damp cloth to clean up toner. If you remove the Imaging Unit, place
it in a light-protective bag or otherwise protect it as exposure to light can
quickly degrade performance and result in early failure.
1. Record number of sheets printed.
2. Print several sheets of paper to check for problems or defects.
3. Turn the printer power Off and disconnect the power cord.
4. Remove the Imaging Unit, Fuser, Toner Cartridges, Left and Right Side
Covers, and Rear Cover before cleaning.
5. Remove the Top Cover and clean the Main Fan to remove excess dust.
6. Ensure that all cover vents are clean and free of obstructions.
7. Remove any debris or foreign objects from the Fuser, Transfer Unit,
Imaging Unit, and inside of the printer.
8. Remove and clean the paper trays.
9. Clean all rubber rollers with a lint-free cloth slightly dampened with cold
water.
Phaser 6130 Color Laser Printer Service Manual