Supported Platforms - ZyXEL Communications ZyWALL 1050 Release Note

www.zyxel.com
ZyXEL ZyWALL 1050
Release 2.01(XL.4)
Release Note
Date: Sep 19, 2008

Supported Platforms:

ZyXEL ZyWALL 1050
Versions:
ZLD Version: 2.01(XL.4) | 2008-09-19
Bootbase: V1.12 | 2007-11-12
Files lists contains in the Release ZIP file
File Name : 201XL4C0.bin
Purpose: This binary firmware image file for normal system update.
Note: The firmware update may take five or more minutes depending on the scale of device
configuration. The more complex the configuration, the longer the update time. Do not turn off or
reset the ZyWALL while the firmware update is in progress. The firmware might get damaged, if
device loss power or you reset the device during the firmware upload. You might need to refer to
User Guide Section 34.8 on page 235 or Appendix 7 of this document to recover the firmware.
File Name : 201XL4C0.conf
Purpose: This ASCII file contains default system configuration commands.
File name : 201XL4C0.db
Purpose: This binary file contains default system signatures.
Note: The file is only needed when doing system recovery from damage.
File name : 201XL4C0.doc
Purpose: This release file.
2/142