ZyXEL Communications ZyWALL 1050 Release Note page 103

www.zyxel.com
Modifications in 1.01(XL.2)b1 - 2006/11/10
1. [BUG FIX] 061011308
Symptom:
If configuring too long descriptions for Device HA rule,
startup-config.conf can't be applied successfully when booting ZW1050.
Condition:
1. To edit a Device HA rule and enter longest description (60 characters).
2. Reboot Zw1050.
3. Console show: % ( after
12345655555555555555555555555555555555555555555555 ): Parse error
4. Failed to apply startup-config.conf. ZW1050 reset itself to system default.
2. [BUG FIX] 061102131
Symptom:
ZyWALL1050 can not accept @ as part of the username. this will affect the Microsoft AD
server authentication process. Most of the AD username will in the format like
xxx@company.com. Thus, '@' is necessary for username.
Condition:
1. Switch to ZyWALL1050 User/Group configuration page.
2. Add a new user name leo@zyxel.com.tw
3. System can not accept this username format and return a warning message.
3. [BUG FIX] 061102083
Symptom:
After adding 1000 tunnels, remove them and then reboot zw1050, it may cause IPSec
engine crash
Condition:
1. After adding a lot of tunnels, such as 1000 tunnels
2. Reboot zw1050 and IPSec engine may crash
The message is as below
Kernel panic: ../../../ipsec/quicksec/engine/engine_rules.c:259
SshEngineRules ssh_engine_delete_rule Assertion failed:
In interrupt handler - not syncing
4. [BUG FIX] 061018604
Symptom:
IPSec tunnel cannot accept packet size ＞ 2020 bytes
Condition:
PC1 - zw70 ＜--＞ zw1050 - PC2
1. ZW1050 builds a tunnel with zw70
2. PC2 try to ping PC1, packet size ＞ 2020, such as in Linux, ping x.x.x.x -s 2021
the packet cannot enter IPSec Engine, and no logs for dropping.
5. [BUG FIX] 061017483
Symptom:
IPsec Pre-share key cannot accept special characters
Condition:
Set preshare key = ",;|`~!@#$%^&*()_+\{}':./<>=-." and try the following scenarios.
zw1050 <> zw1050 => pass
103/142