ZyXEL Communications ZyWALL 1050 Release Note page 25

Firmware release note release 2.01(xl.4)
Hide thumbs Also See for ZyWALL 1050:
Table of Contents

Advertisement

www.zyxel.com
Condition:
FTP Client------WAN [ZyWALL] LAN------- FTP Server
1. Using Serv-U as server, filezilla as client.
2. Use the following config file.
3. FTP server uses virtual server to redirect the connection to real server under LAN.
4. FTP client connects to server via ZyWALL's WAN IP. And ZyWALL will redirect the
connect to LAN server.
5. But if user uses PASV mode as ftp client & turns on IDP on ZyWALL. FTP client will
hang on LIST command.
6. LIST command packet will send to LAN server, but the response of this packet will be
hanged in ZyWALL and not be sent to client.
23. [BUG FIX] SPR ID: 080306250
Symptom:
Incoming interface"any" in policy rule should exclude"ZyWALL" itself
Condition:
Incoming interface"any" in policy rule should exclude"ZyWALL" itself.
Otherwise local generated traffic will match policy rule that lead to unexpected behavior.
24. [BUG FIX] SPR ID: 080317944
Symptom:
Cannot not edit or add policy rule
Condition:
1. Remove all VPN rules
2. Try to add or edit policy rule will fail. User cannot modify policy rule any more.
25. [BUG FIX] SPR ID: 080403242
Symptom:
ZyWALL sends LOG-Mail have character (0x00) at the end of the mail
Condition:
1. Configure ZyWALL to send the log mail while the log is full
2. Some mail server, like Cyrus IMAP server, cannot accept NULL character at the end of
the mail
26. [BUG FIX] SPR ID: 080326471
Symptom:
Hardware watchdog has possibility not to store the CLI command in running config
Condition:
25/142

Advertisement

Table of Contents
loading

Table of Contents