ZyXEL Communications ZyWALL 1050 Release Note page 105

www.zyxel.com
Modifications in 1.01(XL.1)b1 – 2006/10/11
1. [BUG FIX] 060830674
Symptom:
Long DNS Domain Zone will cause DUT "zysh daemon is terminated".
Condition:
1. System ＞ DNS, add a Name Server Record rule, input Domain Zone with long
characters (＞=235 character) and save it.
2. Console will show zysh daemon is terminated:
zysh daemon is terminated at Wed Aug 30 15:47:33 2006
by signal: Segmentation fault
last command function: 0x80ace50
2. [BUG FIX] 060831779
Symptom:
ZW1050 does not accept \ in PPPoE password.
Condition:
1. Use wizard to setup one ISP pppoe interface.
2. Password key in 12345673\. Device does not accept this password.
3. [BUG FIX] 060830672
Symptom:
DNS Domain Zone and Domain Name have not shown warning message and
restrict to input "_" character.
Condition:
1. System ＞ DNS, Domain Zone or Domain Name field input "aaa_bbb.ccc.eee"
and save it.
3. GUI will not load any dns record.
4. [BUG FIX] 060906284
Symptom:
GUI can not display log category "interface statistics" correctly.
Condition:
1. Maintenance ＞ Log page
2. Select Display field to "interface Statistics"
3. The Display field only shows "Debug Log"
5. [BUG FIX] 060818195
Symptom:
When Auto Synchronize is enabled and a virtual server is created to map public IP
to LAN side virtual server, PC from WAN side can't ping to LAN side virtual
server, if master device is down.
Condition:
1. On device ha scenario, create one virtual server entry.
2. Ping from WAN side to global IP on master device.
3. You can see the ping reply from master's LAN PC
4. Turn off master device
5. The WAN's PC can't get ping response.
6. The reason is slave device don't send gratuitous ARP for global IP. So the
WAN's side PC always send ping to master's WAN MAC.
105/142