ZyXEL Communications ZyWALL 1050 Release Note page 119

www.zyxel.com
PC1 can not search Host of PC2 via VPN tunnel even ＂NetBIOS broadcast over IPSec＂
is enabled.
Condition:
PC1-------ZW1050_1=======ZW1050_2-----PC2
1. VPN had been estblished successfully.
2. PC1 can not search Host of PC2 via VPN tunnel even "NetBIOS broadcast over IPSec"
is enabled.
12. [BUG FIX] 060619059
Symptom:
Sort＇s icon on wrong seat when click Log sort by source.
Condition:
1. Logs-> View Log, sort logs by source.
2. Logs-> View Log, Sort's icon displayed on Message's seat. It should be on Source's
seat.
3. Attached picture for your reference.
13. [BUG FIX] 060622331
Symptom:
Backup ZW1050 can not switch LAN IP from management IP to physical IP after
Master ZW1050 shut down.
Condition:
1. Master ZW1050 and Backup ZW1050 are doing Device HA with LAN and WAN
VRRP groups.
2. Backup ZW1050 will automatically sync to Master ZW1050 every one minute.
3. Backup ZW1050 can not switch LAN IP from management IP to physical IP after
Master ZW1050 shut down.
4. After shutting down Master ZW1050:
Backup:HA status of LAN is Active and HA status of WAN is Active
5. Backup ZW1050 can not switch LAN IP from management IP to physical IP.
6. After powering on Master ZW1050:
Backup:HA status of LAN is Active and HA status of WAN is Stand-By
7. Everything goes fine after VRRP group of WAN on Backup is disabled then enabled.
14. [BUG FIX] 060615930
Symptom:
Problem of OSPF virtual-link authentication and backbone area
Condition:
1. aera 0 authentication is none.
2. set virtual link authentication to Text or MD5
3. area 0 authentication will be changed to Text or MD5.
15. [BUG FIX] 060623557
Symptom:
CPU usage 100% when enable content filter and block cookie
Condition:
1. Add a bridge interface members are ge1~ge5
2. Connect ge2 to NAT router's LAN port
3. Enable content filter and block cookie
119/142