ZyXEL Communications ZyWALL 1050 Release Note page 51

www.zyxel.com
1. Create more than 200 tunnels and more than 200 isakmp policies
2. show isakmp policy or display tunnels at GUI,
3. It is very slow to display it.
41. [BUG FIX] SPR ID: 070831026
Symptom:
Enable NAT loopback will lead the box totally lost connection
Condition:
1. Add new virtual server rule
2. name any
3. interface any one, if use LAN1 to connect to usg100, please use wan1, and vice versa
4. custom defined ip, any valid ip
5. port any
6. disable create policy route
7. enable NAT loopback.
8. click ok
upon the ok is hit, the box will lost all the connections.
the wrong iptables rule is probably applied into system.
all connection to the box is failed.
To disable this situation, using console to remove NAT loopback rule and also the virtual
server rul.
42. [BUG FIX] SPR ID: 070906273
Symptom:
Activation configuration for AV WBL pattern entry cannot be modified
Condition:
1. create one AV WBL entry with activation being enabled
2. edit this entry
3. disabled this entry
4. activation disabling failed
43. [BUG FIX] SPR ID: 070910412
Symptom:
Device cannot build PPP connection successfully with W2003 RASPPPOE server
Condition:
Beta user Harald reported that device cannot build PPP connection successfully with
W2003 RASPPPOE server.W2003 is asking for EAP for authentication method in LCP
and device should refuse it.
44. [BUG FIX] SPR ID: 070927499
51/142