ZyXEL Communications ZyWALL 1050 Release Note page 90

www.zyxel.com
1. During test dial backup function (from item 1.3.3.1 to 1.3.3.8), DUT happened twice"
aux_config is dead".
2. I have changed configuration for Auxiliary-Interface serial times, and had dial up the
aux connection.
3. Attached configuration file.
13. [BUG FIX] 061221366
Symptom:
Virtual Server rule can't be deceived if Mapping Type=ports
Condition:
1. Add a Virtual Server rule Mapping Type=Ports Protocol; Type=Any; Original Start
Port=19998; Original End Port=20010; Mapped Start Port=19999; Mapped End
Port=20011.
2. Edit this rule, and deactivate this rule, click Apply button, this rule still enable.
14. [BUG FIX] 061221367
Symptom:
Address/PTR Record FQDN not support special characters
Condition:
1. In GUI, ZyWALL 1050 > System > DNS Address/PTR FQDN not support special
characters like as _ - ~
15. [BUG FIX] 061222505
Symptom:
SMT occur message when setting PPTP interface
Condition:
1. SMT occur message"min process count: 1" "pptp process count is incorrect at Thu Dec
21 11:28:26 2006" "current process count: 3" "max process count: 1" when setting PPTP
interface.
2. Attach conf file
16. [BUG FIX] 061222510
Symptom:
User account can't login
Condition:
1. User/Group > User, add a user type account account=abcdefghijklmnopqrstuvwxyz_-@..
Password=1234567890abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVW
XYZ`
2. User use "abcdefghijklmnopqrstuvwxyz_-@.." account login to device
and Password is
1234567890abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ`
3. It can't login successful
17. [BUG FIX] 061222532
Symptom:
User Logon setting behavior not correct
Condition:
1. In GUI ZyWALL 1050 > Object > User/Group > Setting page, User Logon Setting
enable administration account Maximum number to 2
2. Use same PC to login DUT by admin account, then close browser directly. Then login
90/142