ZyXEL Communications ZyWALL 1050 Release Note page 65

www.zyxel.com
Condition:
1. ZW1050 1.00(XL.0)c0，add a MSN rule (only "log" this protocol)
2. Upgrade firmware to 2.00(XL.0)b6
3. There is an extra default MSN rule which inbound/outbound bandwidth is "1"
4. This issue is no only MSN but also other protocols which support BWM
Modifications in 2.00(XL.0)b6 - 2007/07/06
1. [BUG FIX] 070628835
Symptom:
Device crash when doing VPN+IDP performance test
Condition:
Device crash when doing VPN+IDP performance test (packet size: 1460)
2. [BUG FIX] 070529412
Symptom:
ZW1050 crashed due to AV decompress function
Condition:
1. Enable AV and decompress function
2. After two days, decompress function failed and make ZW1050 crashed
3. [BUG FIX] 070702010
Symptom:
Device complained out of flash space and PC can't get IP address
Condition:
1. Create/Connect a PPPoE interface but the interface was not quite stable (It may be
related to service provider)
2. After one night, device complained out of flash space and PC can't get IP address
4. [BUG FIX] 070702011
Symptom:
Device crashed after performing IxLoad UTM test with 128K sessions
Condition:
1. Turn AV、IDP functions，and protect all zones
2. IxLoad simulates 128k sessions and all of them have HTTP and FTP traffic which has
1MB virus zip file and 1M pure file download traffic
3. DUT crashed after several hours
5. [BUG FIX] 070702058
Symptom:
Application patrol rules disappear
Condition:
1. Application patrol > Peer to Peer，disable/enable all rules at the same time，all of rules
can disappear.
2. Application patrol > VoIP，disable/enable all rules at the same time，all of rules can
disappear.
65/142