ZyXEL Communications ZyWALL 1050 Release Note page 40

www.zyxel.com
Condition:
1. Use dialogic sip phone (HMP 3.0)
2. Caller (LAN side)-USG300-caller (WAN side)
3. Caller (WAN side)' voice cannot pass through device
53. [BUG FIX] SPR ID: 080122107
Symptom:
Can not establish SSL VPN full-tunnel successfully when authenticating client certificates
is enabled on USG-300.
Condition:
1. Enable authenticating client certificates in USG-300.
2. Import personal certificate to ZyWALL ＞ Object ＞ Certificate ＞ Trusted Certificates
3. Then we will find that we cannot establish SSL VPN full tunnel successfully even
though we have imported the personal certificate to browser and JRE.
Modifications in 2.01(XL.0)b2 - 2007/10/22
1. [BUG FIX] SPR ID: 071018944
Symptom:
Can't enable Use Policy Route to control dynamic IPSec Rules on GUI.
Condition:
1. Can't enable Use Policy Route to control dynamic IPSec Rules on GUI.
2. Bug fix verified failed.
2. [BUG FIX] SPR ID: 071018979
Symptom:
Virtual server wording error.
Condition:
The help message "If you enable NAT loopback, the traffic from any interface distin to
original IP will apply this IP address mapping, you will need to configure a corresponding
policy route." is not correct.
3. [BUG FIX] SPR ID: 071018987
Symptom:
kernel crash
Condition:
Use Ecard topology
PC1(10.170.9.100) --- zw70-A --- 172.23.39.0/24 -- (ge2) zw1050 (ge3, ge4)
--- zw70-B --(192.168.1.0/24)-- PC2 (192.168.1.33)
1. PC1 try to login 192.168.10.1 (at zw1050 LAN IP)
40/142