ZyXEL Communications ZyWALL 1050 Release Note page 91

Firmware release note release 2.01(xl.4)
Hide thumbs Also See for ZyWALL 1050:
Table of Contents

Advertisement

www.zyxel.com
again and close browser again. Then third to login by admin account will be limited.
3. It should be judged by IP address.
18. [BUG FIX] 061226891
Symptom:
Ge3 ping check function issue.
Condition:
1. By default, ge2 is disconnected and ge3 is connected.
2. Open the ge3 ping check function.
3. When ping check detect the ping fail, DUT will inactive the ge3 and the traffic can not
go out.
4. When the ping check detect the ping successfully again, the DUT will reactive the ge3,
but the traffic still can not go out.
19. [BUG FIX] 061226909
Symptom:
L2TP VPN connects to device cause device sshipsecpm dead.
Condition:
1. Enable the L2TP over IPSEC VPN.
2. PC in WAN side connects to device.
3. The console show"sshispecpm is dead ..."
20. [BUG FIX] 061229036
Symptom:
L2TP VPN authentication issue.
Condition:
1. Using RADIUS Group for the authentication
2. There are two radius server ip addresses, and the second one is correct
3. In this condition, L2TP can not login, if change the correct ip address in first line, then it
work fine
21. [BUG FIX] 070102053
Symptom:
AV can not scan ftp download / upload file
Condition:
1. Make LAN side PC go out by ppp(PPPoE only) interface and AV scan LAN <-> WAN
file
2. LAN side PC connects to WAN side FTP server
3. LAN side PC downloads / upload virus file from / to WAN side FTP server.
4. DUT can not detect virus file
22. [BUG FIX] 070102054
Symptom:
AV can not scan POP3
Condition:
1. Make LAN side PC go out by ppp(PPPoE only) interface and AV scan LAN <-> WAN
file
2. LAN side PC can receive mail which has virus attachment
3. DUT can not detect virus file
91/142

Advertisement

Table of Contents
loading

Table of Contents