ZyXEL Communications ZyWALL 1050 Release Note page 84

www.zyxel.com
19. [BUG FIX] 070108400
Symptom:
IDP log always be "alert log"
Condition:
1. Add a profile for WAN to LAN
2. Disable firewall
3. Add a virtual server which forward ge2 traffic to LAN (192.168.1.33)
4. Add a IDP rule which protect WAN (ppp0) to LAN (192.168.1.0/24) , set ID=8003992
log=log, action=drop/reset-both/reset-sender/reset-receiver
5. Do attack from WAN to LAN which can match IDP ID=8003992
6. DUT always generate "alert log" instead of "log"
20. [BUG FIX] 070108401
Symptom:
CNM can not support DUT
Condition:
Firmware do not have XML file, CNM2.3 can not support DUT
21. [BUG FIX] 070109509
Symptom:
Bi-direction traffic in 5 IPSEC VPN cause traffic hang up.
Condition:
1. Test case, 1.3.6.31.2
2. ZW1050 setup 5 IPSEC with 5 IKE to 5 devices.
3. Generate 45Mbps bi-direction traffic, the console will show "Process:868"
4. Then, all traffic can not through VPN tunnel.
22. [BUG FIX] 070110559
Symptom:
There is no log when Login SSLVPN users reach to max SSL user.
Condition:
There is no log when Login SSLVPN users reach to max SSL user.
23. [BUG FIX] 070110563
Symptom:
Inactivate SSLVPN rule. The user still can login portal but can't see any application.
Condition:
1. Inactive SSLVPN rule with 1 web application.
2. The user still can login portal but can't see any application on SSLVPN portal.
24. [BUG FIX] 070110565
Symptom:
The external user didn't add to SSLVPN rule. The user still can login portal but can't see
any application.
Condition:
1. Add an external user on Radius/AD/LDAP server.
2. Don't add the external user to SSLVPN rule.
3. Use the external user to login SSLVPN portal successfully but can't see any application
on portal.
84/142