ZyXEL Communications ZyWALL 1050 Release Note page 83

Firmware release note release 2.01(xl.4)
Hide thumbs Also See for ZyWALL 1050:
Table of Contents

Advertisement

www.zyxel.com
Device can not be accessed and gets no ping response after doing AV performance test in
background traffic of POP3 with 1MB ZIP file.
Condition:
1. Device can not be accessed and gets no ping response after doing AV performance test
in background traffic of POP3 with 1MB ZIP file.
14. [BUG FIX] 061227966
Symptom:
DUT memory usage will continue increase after stress test.
Condition:
1. DUT do FTP and eMule stress test several days, the memory usage reach over 90%.
2. PQA gateway use several days, the memory usage reaches 80%.
3. Attached the FTP stress configuration file.
15. [BUG FIX] 070102056
Symptom:
Mail attachment disappear
Condition:
1. Make LAN side PC go out by ppp(PPPoE or PPTP) interface and AV scan WAN<-
>LAN SMTP/POP3/IMAP4 protocol
2. LAN side PC can receive POP3/IMAP4 mail but some of files may disappear (the mail
should has 2 virus files and 2 virus zip files, but LAN PC only receive 3 files)
16. [BUG FIX] 070104267
Symptom:
Strange message "HTB: quantum of class 10001 is big. Consider r2q change..." showed in
console if we modify ge3's metric.
Condition:
1. Please upload the configuration file.
2. Modify ge3's metric and then apply and you will see a lot of messages in console.
17. [BUG FIX] 070104274
Symptom:
CPU will reach 99%.
Condition:
1. Using Wizard to create a VPN tunnel.
2. The CPU usage will always keep in 99%.
3. Can not be replicated.
18. [BUG FIX] 070105334
Symptom:
ADP can not detect HTTP inspection
Condition:
1. Add a ppp0 (PPPoE) interface on ge3
2. Disable firewall
3. Add a virtual server which forward ppp0 traffic to LAN (192.168.1.33)
4. Add a ADP rule which protect WAN (ppp0) to LAN (192.168.1.0/24)
5. Do HTTP inspection attack from WAN to LAN
6. DUT can not detect attack
83/142

Advertisement

Table of Contents
loading

Table of Contents