ZyXEL Communications ZyWALL 1050 Release Note page 12

www.zyxel.com
2. Enable interface wan1 and lan1 RIP and V2-Broadcast on device B.
3. Go to ZyWALL > Network > Routing > RIP and set MD5 Authentication. On device A,
ID is 111, Key is abcde. On device B, ID is 222, Key is abcde.
4. Enter CLI command "show ip route", you will find device A can learn routes from B.
It's an incorrect behavior.
16. [BUG FIX] SPR ID: 080605408
Symptom:
FTP port mode will fail to list when enabling one of AV, IDP, ADP and App. Patrol.
Condition:
1. Enable the Anti-Virus and Anti-Spyware.
2. Enable ALG ftp with port 21
3. FTP server on WAN.
4. FTP client on LAN with IP 192.168.1.1
5. FTP client connects to server with PORT mode. File list cannot be received.
17. [BUG FIX] SPR ID: 080630560
Symptom:
Firewall will drop the connection immediately while receiving the ICMP Redirect packet.
Condition:
PC USG300 A
1. A, B, and C are on the same network.
2. PC cannot access some URLs because ZyWALL terminates connection.
18. [BUG FIX] SPR ID: 080819276
Symptom:
The log severity should be modified to Alert.
Condition:
1. Go to ZyWALL > Network > Interface > Ethernet and edit ge2.
2. Enable Ping Check, and check period is 5 seconds, check timeout is 1 second, and
check fail tolerance is 1.
3. Disconnect ge2 about half minute and then reconnect it.
4. Go to ZyWALL > Maintenance > Log and you will find one logging entry about ping
check whose priority is alert.
19. [BUG FIX] SPR ID: 070628808
Symptom:
White list and Black list do not work while setting the file pattern as fi*.zip.
USG300 B ZW1050 C WAN
12/142