ZyXEL Communications ZyWALL 1050 Release Note page 52

www.zyxel.com
Symptom:
System crash due to AV HTTP protocol scanning
Condition:
1. enable AV HTTP protocol scanning
2. try to visit web site which support http chunk-extension
3. system crash
45. [BUG FIX] SPR ID: 070927503
Symptom:
system crash due to off/on IDP continually
Condition:
1. disable IDP scanning
2. enable ALG
3. establish FTP control session
4. enble IDP scanning
5. FTP get/put file associate with previous FTP control session
6. system may crash
46. [BUG FIX] SPR ID: 071004225
Symptom:
After deleting bridge interface, device hanged due to usage count is not 0
Condition:
Topology:
GE1 --＞ PC, GE2 --＞ WAN, GE1 & GE2 are in br0
1. Use the attached config as your startup-config.conf and reboot.
2. Booting with startup-config.conf
3. After booting, Log in as admin via CLI and type"no interface br0" --＞ device hang and
keep printing "bridge interface usage count is not 0"
47. [BUG FIX] 070806418
Symptom:
Device crashed when doing configuration change to bridge mode at automation station.
Condition:
1. Configure bridge interface bind GE1 and GE2.
2. Reboot device.
3. System may crash due to apply policy routing to trunk.
48. [BUG FIX] 070711647
Symptom:
SSLVPN client with Full tunnel mode couldn't be forced logout on eWC/System
Status/Number of Login Users.
52/142