ZyXEL Communications ZyWALL 1050 Release Note page 60

www.zyxel.com
Double quote has been supported in the following feature.
For description purpose: Generic description & packet trace & Log
For password purpose: User/Device HA/IPSec/X-Auth/AAA objects
For IPSec VPN keys: Encryption/Authentication/Pre-shared key
For Content Filter: Block message
2. [BUG FIX] 070713768
Symptom:
Policy route can't work if user is SSLVPN client.
Condition:
1. Create a SSL VPN rule with full tunnel mode.
2. Create a policy route for the SSL VPN and user is SSLVPN client.
3. A user login SSLVPN and can't go out via policy route.
4. Change policy route user to any, it can work.
3. [BUG FIX] 070719013
Symptom:
Device cannot support 50 SSL VPN concurrent sessions.
Condition:
The 48th user always gets a failure while logging in to portal.
4. [BUG FIX] 070720111
Symptom:
GUI displayed wrong information while testing maximum SSLVPN tunnels.
Condition:
1. GUI displayed wrong information while testing maximum SSLVPN tunnels.
2. Please refer the attachment.
5. [FEATURE CHANGE] 070511491
Symptom:
Second Login from same IP will kick out previous login.
Condition:
The second login from same IP address, even with different user name, will lock out
previous login. With this limitation, two SSLVPN user under same NAT router cannot be
supported, which is inconvenient in real world.
6. [Enhancement]
Support enable/disable content filter report
In order to provide web access report for licensed content filter service, device needs to send
web access information to ZyXEL report server. There is a new checkbox in content filter
configuration page and default value is off. Administrators could use it to choose sending the
information or not. Note that if choosing not to send, there will be no web access report in
myZyXEL.com.
7. [Enhancement] 070621300
Symptom:
CLI doesn't support flush all ARP entries.
Condition:
There should be a command which flushes all ARP entries
60/142