ZyXEL Communications ZyWALL 1050 Release Note page 71

Firmware release note release 2.01(xl.4)
Hide thumbs Also See for ZyWALL 1050:
Table of Contents

Advertisement

www.zyxel.com
Condition:
1. Device can not be accessed and gets no ping response after doing AV performance test
in background traffic of POP3 with 1MB ZIP file.
13. [BUG FIX] 070103111
Symptom:
L2TP FTP stress causes IPSEC VPN disconnect.
Condition:
1. One L2TP user connects to DUT.
2. The user starts FTP stress test.
3. About 3 minutes, the IPSEC that the L2TP use will disconnect.
14. [BUG FIX] 070104267
Symptom:
Strange message "HTB: quantum of class 10001 is big. Consider r2q change..." showed in
console if we modify ge3's metric
Condition:
1. Please upload the configuration file.
2. Modify ge3's metric and then apply and you will see a lot of messages in console.
15. [BUG FIX] 070207556
Symptom:
DUT crash when performing SIP testing
Condition:
1. Load configuration
2. Call X-Lite from WAN to LAN, but SIP from WAN to LAN failed
3. Collect Diagnostic at the same time when on call
4. DUT crash
16. [BUG FIX] 070208690
Symptom:
Certificate can not be exported.
Condition:
1. Create a third party sign certificate, but this certificate can not be exported. Self signed is
OK.
2. This issue will cause device HA sync function work fail.
17. [BUG FIX] 070212094
Symptom:
The DUT may has upgraded to f/w 2.0 before, and then downgrade to 1.0 now. When you
try to upgrade to 2.0 again, DUT will show "Unable to connect ZySH Daemon"
Condition:
DUT ---upgraded to 2.0 --->DUT ----downgraded to 1.0-----> DUT -----upgraded to 2.0 ---
>DUT
(Step1) (Step2) (Step3)
Step1, there is a new file ("self.rules" in /etc/idp) that no existence in f/w 1.0 upgraded to
DUT .
Step2, the file is still alive after downgrading to f/w 1.0.
Step3, When upgrading to f/w 2.0 again, DUT will check whether the new file exist or not.
71/142

Advertisement

Table of Contents
loading

Table of Contents