ZyXEL Communications ZyWALL 1050 Release Note page 117

www.zyxel.com
4 ge2:2 Down 1.1.1.21 255.255.255.0 Static
5 ge2:4 Down 1.1.2.21 255.255.255.0 Static
6 ge3 Down 0.0.0.0 0.0.0.0 DHCP client
7 ge4 Down 0.0.0.0 0.0.0.0 Static
8 ge5 Down 0.0.0.0 0.0.0.0 Static
9 aux Inactive 0.0.0.0 0.0.0.0 Dynamic
Modifications in 1.00(XL.1)b1 – 2006/7/7
1. [BUG FIX] 060109366
Symptom:
Firewall LAN to WAN rule display error
Condition:
1. Use GUI, add a Firewall Zone pair LAN to WAN, deny FTP service.
2. Return to Firewall summary page, LAN to WAN rule will disappear.
3. Check Global rule, there are two LAN to WAN rule exist.
4. Attach Picture and Conf file.
2. [BUG FIX] 060411661
Symptom:
VPN, sometimes when we configure Phase1＇s parameters, the GUI showed ＂Error: [-
1], Parse error/command not found!. ＂
Condition:
1.An example is set Local ID type and Peer ID type.
3. [BUG FIX] 060530933
Symptom:
"Web page error" on Policy route page
Condition:
1. On GUI, Configuration > Policy > Route > Policy Route > Edit > #1 page, Incoming
select Change button, Incoming=Tunnel and don't select any VPN tunnel click OK, click
Change button again IE will show "Web page error"
4. [BUG FIX] 060609585
Symptom:
Can＇t change Connection ID from ＂ S:＂ to blank.
Condition:
1. Interface > ISP Account, add one profile "ppp0" for PPTP account, and set the
Connection ID to " S: ".
2. Interface > ISP Account > Edit profile "ppp0", Change Connection ID from " S: " to
blank, OK.
3. Interface > ISP Account > Check profile "ppp0", the Connection ID is still " S: ".
5. [BUG FIX] 060609642
Symptom:
IDP ＂Packet Inspection＂ still detected attack traffic, even if DUT not registration or
IDP not licensed.
Condition:
117/142