ZyXEL Communications ZyWALL 1050 Release Note page 26

www.zyxel.com
When hardware watch dog is on, the related CLI should be stored in running configuration
27. [BUG FIX] SPR ID: 080306246
Symptom:
Security issue of open port 2601, 2602 and 2604
Condition:
1. Use port scan tool like Nmap to scan the open ports of device.
2. Found the port 2601, 2602 and 2604 is opened and able to be accessed.
3. These ports are opened by routing protocol daemons, and should be blocked to avoid the
security issue.
28. [BUG FIX] SPR ID: 080317009
Symptom:
Configuration file cannot be renamed and deleted
Condition:
1. Upload configuration file with filename including SPACE character to device via FTP
2. Cannot rename this configuration file via either CLI or GUI
29. [BUG FIX] SPR ID: 080326461
Symptom:
GUI Boot Status might present"internal error" during applying configuration
Condition:
1. Apply system default configuration
2. Connect to GUI via LAN after HTTP server is brought up
3. Sometimes you will see Boot Status presents "internal error" in status page
4. This is because system configuration is not completely applied yet
5. It will be better to tell user configuration is still under applying instead of displaying
"internal error"
30. [BUG FIX] SPR ID: 080410476
Symptom:
Interface won't release IP address after Link Down happened
Condition:
1. Use system default configuration
2. Connect ge2 to WAN to get the IP from DHCP server
3. After ge2 gets the IP address, disconnect the cable
4. Link Down event triggered but the IP address of ge2 didn't release
26/142