ZyXEL Communications ZyWALL 1050 Release Note page 53

www.zyxel.com
Condition:
1. A user login SSLVPN full tunnel mode.
2. When it is forced logout abnormally, the administrator can't force it logout via
eWC/System Status/Number of Login Users.
49. [BUG FIX] 070903066
Symptom:
Limit additional UDP port 10000 inbound traffic failed.
Condition:
PC1-----(L)USG300(W)-----PC2(192.168.14.49)
1.Enable Application Patrol & BWM
2.add a rule
- Port=10000
- Protocol=UDP
- Outbound traffic=200kbps
- Log = log
3.The traffic of UDP:10000 can NOT be managed and there is no log about this traffic(rule
doesn't work)
50. [BUG FIX] 070919064
Symptom:
ZyWALL shows incorrect title on pop-up windows after clicking "Sync. Now" in Device
HA.
Condition:
1. Click sync now button in Device HA GUI.
2. The poped-up windows will show incorrect title.
51. [BUG FIX] 070801081
Symptom:
At GUI trunk configuration, the default weight on Weighted Round Robin algorithm is not
correct.
Condition:
1. use system_derault.conf
2. At GUI, go to Interface -＞ Trunk and modify WAN_TRUNK.
3. When user select Weighted Round Robin algorithm, the default weight is 0.
4. But at DFC, it should be 1 (Since its range is 1-10).
5. The default spillover value is also not match with DFC.
52. [BUG FIX] 070803311
53/142