ZyXEL Communications ZyWALL 1050 Release Note page 74

www.zyxel.com
Can not run SNMP over IPSEC VPN
28. [BUG FIX] 070404201
Symptom:
Can not configure active directory tab in zw1050 with a username that contains spaces
Condition:
The following valid Bind DN in my Active Directory is not accepted by zw1050 user
interface:
Bind DN
cn=zw1050 User
Looks like a bug unless I need to use "" like this "cn=zw1050 User"
29. [BUG FIX] 070404244
Symptom:
MAX SSL VPN test FAIL
Condition:
DUT will disconnect some SSL connection when the SSL connection is increasing.
30. [BUG FIX] 070406292
Symptom:
GUI configures IPSEC VPN issue.
Condition:
1. GUI VPN > IPSEC VPN > VPN Connection
2. Create a VPN connection, and key in "Connection Name"
3. Then select a VPN gateway as "Default_L2TP_VPN_GW".
4. Will see the "connection name" disappear.
5. Create new address object in "Local policy" field.
6. After new object created, will see the Proposal rule increases to three rules.
31. [BUG FIX] 070408325
Symptom:
Firmware upgrade and downgrade between 1.0 and 2.0 issue.
Condition:
1. Firmware upgrade from 1.0 to 2.0 will cause IDP work FAIL.
2. Firmware downgrade from 2.0 to 1.0 will cause startup-configuration file apply FAIL.
3. Please check the firmware upgrade sheet in bug report.
32. [BUG FIX] 070410423
Symptom:
Shut down DHCP sever in LAN side on ge1 interface. PC in LAN side still can get IP from
device if there used to be 2 DHCP servers binding on 2 interfaces.
Condition:
1. Set ge5 interface as DMZ zone with DHCP server.
2. Shut down DHCP server on ge1.
3. PC in LAN side still can get IP from device if there used to be 2 DHCP servers binding
on 2 interfaces.
33. [BUG FIX] 070411463
Symptom:
Java console has problem if we change the SSH or HTTPS port.
74/142