ZyXEL Communications ZyWALL 1050 Release Note page 93

www.zyxel.com
2. The pop-up window ( when add a new profile ) title "Please select one IDP Base Profile"
should be "Please select one ADP Base Profile"
29. [BUG FIX] 070103163
Symptom:
ADP traffic anomaly scan detection action="original setting" and flood detection
action="original setting" fail
Condition:
1. ADP traffic anomaly scan detection action="original setting" and flood detection
action="original setting" fail, I can not make reset action to original.
30. [BUG FIX] 070104190
Symptom:
All ADP profiles will disappear when doing some setting changes.
Condition:
1. Edit DMZ_IDP in eWC/Anti-X/ADP/Profile.
2. Change action of (flood) IP Flood and (flood) UDP Flood from none to block in Flood
Detection of DMZ_IDP profile, then click OK.
3. Edit DMZ_IDP in eWC/Anti-X/ADP/Profile again.
4. Change action from original setting to block and back to original setting in Flood
Detection of DMZ_IDP profile, then click OK.
5. All ADP profiles will disappear and there will be a pop-up warning message"Number of
IDP profile reaches the maximum." if add one new profile.
31. [BUG FIX] 070104275
Symptom:
VPN can not be building up successfully if turn on the L2TP service.
Condition:
1. DUT-A <-- IPSEC --> DUT-B
2. Setup the IPSEC VPN between two devices, and DUT-A turn on the L2TP service.
3. DUT-B can not initiate the IPSEC with DUT-A, but DUT-A can initiate the IPSEC
tunnel eith DUT-B.
32. [BUG FIX] 070111617
Symptom:
Sometimes content filter cache data are wrong
Condition:
1. Access lots of different web sites at a short time
2. Some of content filter cache data are wrong (www.google.com belongs to hacking
category)
33. [BUG FIX] 060830671
Symptom:
DNS page can not load any record, when using Firefox and GUI show FQDN field
warning message
Condition:
1. System > DNS, enable DNS.
2. System > DNS, add a Address/PTR Record rules.
3. Set "aaaa" in the FQDN field and click OK, GUI will be show warning message.
4. And GUI will not load any dns record.
93/142