ZyXEL Communications ZyWALL 1050 Release Note page 23

www.zyxel.com
(1) Create a SSL application named"OWA111" (Type is OWA and URL is
https://mail.111.com.tw).
(2) Create a SSL policy named "New_Policy1" and add SSL application "OWA111" to
this policy
(3) Change type of SSL application "OWA111" to file sharing (URL is set to
\\172.23.41.13\public)
(4) Create a SSL application named "OWA222"( Type is OWA and URL is
https://mail.222.com.tw).
(5) Add SSL application"OWA222" to policy"New_Policy1"
(6) after steps (1) to (5), we find that user can not access"OWA222".
Method 3:
(1) Create a SSL application named"OWA111" (Type is OWA and URL is
https://mail.111.com.tw).
(2) Create a SSL policy named "New_Policy1" and add SSL application "OWA111" to
this policy
(3) Create a SSL policy named "New_Policy2" and add SSL application "OWA111" to
this policy
(4) Change URL of SSL application "OWA111" to https://mail.zyxel.com.tw
(5) After steps (1) to (4), we will find that user can not access "OWA111".
18. [BUG FIX] SPR ID: 080306271
Symptom:
IPSec module is not notified for the MTU change of interfaces
Condition:
1. Change interface ge2 mtu to 1000
2. Build a tunnel from ge2 to remote gateway
3. Send traffic from LAN to the tunnel, the packet should be 1000~1400 byte and DF bit is
set
4. The traffic should be dropped, but actually it pass through the tunnel.
The reason is due to the incorrect return value of vlan_change_mtu() in kernel, and cannot
trigger the event notification.
19. [BUG FIX] SPR ID: 080306310
Symptom:
TFTP traffic cannot pass through IPSec tunnel
Condition:
23/142