ZyXEL Communications ZyWALL 1050 Release Note page 31

www.zyxel.com
2. Use show running-config to show the saved commands ==＞ there will be an additional
space in saved command as below ldap-server basedn
OU=WithMail,DC=Zyxel,DC=com ldap-server binddn
cn=guest,OU=WithMail,DC=Zyxel,DC=com * there are two spaces between "ldap-
server basedn" and "OU=WithMail,DC=Zyxel,DC=com"
3. After rebooting, there will be 3 spaces ==＞ eventually device will fail to apply the two
commands because of limit of string length
16. [BUG FIX] SPR ID: 071129932
Symptom:
Cannot access GUI Log page
Condition:
1. Use ISS to scan / attack DUT
2. ISS will send a user name"User: ^Xn|(h^Y^H^L^Z^H$rn^K" to try to access FTP
server
3. DUT can't analysis this string
4. Can't access GUI log page
17. [BUG FIX] SPR ID: 071011608
Symptom:
Can't use 63 chars in BindDN/BaseDN for AD/LDAP server
Condition:
Reported by WuXI RD
1. In ewc "ZyWALL ＞ Object ＞ AAA Server ＞ Active Directory ＞ Default" fill Bind
DN=63 characters; fill Base DN=63 characters then click apply
2. Refresh page check the Bind DN and Base DN is different with you just edited
Result: When Bind DN and Base DN is max value the value cannot be saved
18. [BUG FIX] SPR ID: 070717920
Symptom:
Application patrol the inserted rule can be default rule
Condition:
1. Application Patrol ＞ Common ＞ HTTP，add a normal rule
2. Application Patrol ＞ Common ＞ HTTP，insert a rule before default rule
3. The inserted rule misses some entries.
19. [BUG FIX] SPR ID: 071031804
Symptom:
Should not report error when enter the same default port on the same protocol
Condition:
In CLI
1. Use 'app smtp defaultport 25' to add default port in smtp
2. Again use 'app smtp defaultport 25' to add a repeat default port 25 in smtp
31/142