Advertisement
1. Connect a CAT5e RJ45 cable to either RJ45 port on the VSSEP1EC
Figure 6.6 RJ45 port on server's operator panel
2. Connect the opposite end of the cable to the appropriate port on the
3. Proceed to access the BMC WebUI to graphically install the operating
Accessing the BMC WebUI
The BMC WebUI is used to launch the JAVA™ console, which provides a
graphical interface necessary to install most operating systems.
1. From the PC, open a web browser and navigate to the following URL.
Replace the
"BMC-IP-Address"
using the actual
address for the
BMC IP.
2. The BMC WebUI login dialog box displays as shown in Figure 6.7 on
CTC-DOC-002293, Rev A.2
Server Module operator panel. The RJ45 ports provide network access
to the BMC WebUI and are identified in Figure 6.6.
local PC.
system.
(Use https for a secure login.)
https://<BMC-IP-Address>
page 70.
NOTE: The screen captures presented here are indicative of what displays upon
logging on to the BMC WebUI. The information may differ slightly depending on the
operating system, chosen browser, and server configuration.
VSS2249RQ Storage Server User Guide
| 69 |
Advertisement
Chapters
