Advertisement
5. For future use, make note of the directory in which the tool saves the
Setting up the VCP
After installing the VCP driver and terminal emulator application, configure the
PC's VCP. Verify the PC's COM port terminal emulation settings are properly
defined as follows:
Obtaining the Server's BMC IP Address
To obtain the server's BMC IP address, the user must access the BIOS. The
user may change the BIOS settings to perform certain task, such as to:
Accessing the BIOS
These instructions guide the user in accessing the server's BIOS to obtain the
BMC IP address.
| 64 |
NOTE: PuTTY is available for Microsoft® Windows download as an executable, or for
Linux as an installation.
transfer files.
Function keys and keypad = VT100
Speed (baud) = 115200
Data bits: 8
Stop bits: 1
Parity: None
Flow control: None
Click the Control-H option button in The Backspace key dialog.
NOTE: The BIOS setup utility is best viewed with the terminal display set to 100x31.
Select a different boot order (e.g. to boot an operating system from a
USB device)
Turn processor chip hyperthreading on or off
Enable Virtualization settings
Set up the BMC network configuration
Reset the system date and time
Chapter 6: Operating System & Firmware Setup
CTC-DOC-002293, Rev A.2
Advertisement
Chapters
