Viking VSS2249RQ User Manual page 63

Figure 4.13 Align the standoffs with the keyholes
2. Slide the rail towards the back of the enclosure to secure the standoff on
Figure 4.14 Securing the standoff over the keyhole
3. Secure the rail in place using one of the M4 X 4 screws in the hole just
CTC-DOC-002293, Rev A.2
Front
the smaller section of the keyhole to lock the rail in place, which is
accompanied by an audible click. Refer to Figure 4.14.
behind the release tab as identified in Figure 4.15 on page 40.
VSS2249RQ Storage Server User Guide
Rear
| 39 |