Viking VSS2249RQ User Manual page 123

1. Open the cable retaining clips on the section of the CMA arm closest to
Figure 8.7 Cables removed from retaining clips
2. Pull the CMA body connector off of the CMA body rail connector.
3. Swing the CMA arm outward, as shown in Figure 8.8.
Figure 8.8 CMA body side cleared
The body side of the CMA is cleared. Proceed to the appropriate FRU section
that follows to replace the server module or PM.
CTC-DOC-002293, Rev A.2
the server and lift the cables out of the clips (see Figure 8.7).
VSS2249RQ Storage Server User Guide | 99 |