Assembled Cma - Viking VSS2249RQ User Manual

Figure 4.21 Assembled CMA
8. Test the CMA to ensure smooth CMA operation. No pinching or binding
Figure 4.22 Release tab
9. Do not power the system at this time. Proceed to Chapter 5 to review the
CTC-DOC-002293, Rev A.2
of the cables should occur. When pulling the enclosure from the rack, the
rails lock in the serviceable position. To release the rails from the
serviceable position, press the release tab on each inner chassis
member rail simultaneously (see Figure 4.22) and push the enclosure
into the rack.
Refer to the section titled "System Cabling & Management" that begins on
page 21 of Chapter 3 for guidance with the server module operator panel and
cable recommendations.
system power configuration.
VSS2249RQ Storage Server User Guide
Cable
Remove zip tie
before use
| 47 |