Viking VSS2249RQ User Manual page 144

Returning the CMA - Arm Side
1. Swing the inner and outer CMA arms forward to the CMA arm side rail.
2. Align the inner CMA arm connector with the inner CMA arm rail
Figure 8.33 Aligning inner CMA arm connector and inner arm rail connector
3. Slide the inner arm connector onto the inner arm rail connector until the
Figure 8.34 CMA inner arm correctly installed
| 120 |
To review the CMA components, refer to the section titled "Cable Management
Hardware" that begins on page 47 of Chapter 4.
connector, as shown in Figure 8.33.
release button clicks. When connected correctly, the inner arm of the
CMA appears as shown in Figure 8.34.
Chapter 8: System Maintenance CTC-DOC-002293, Rev A.2