Returning The Optional Bezel; Shipping Screws - Viking VSS2249RQ User Manual

2. Secure the enclosure to the rack. Tighten the left and right shipping
Figure 8.29 Shipping screws
3. Complete the appropriate service action as outlined in the section titled

RETURNING THE OPTIONAL BEZEL

1. Align the ends of the bezel with the right and left rack ears.
2. Slide the two retention tabs on the underside of the right bezel into the
CTC-DOC-002293, Rev A.2
screws on each side of the enclosure as demonstrated in Figure 8.29.
"Returning the Optional Bezel" on page 117. If no bezel is required, skip
this step.
slots in the top of the right rack ear identified in Figure 8.30 on page 118.
VSS2249RQ Storage Server User Guide | 117 |