Installing The Rails Onto The Rack Posts - Viking VSS2249RQ User Manual

Figure 4.15 Securing the rail
4. Repeat steps 1 through 3 to secure the left rail onto the chassis.

INSTALLING THE RAILS ONTO THE RACK POSTS

These instructions provide the process for installing the front and rear mounting
brackets into each of the four rack posts.
1. Align the left rear bracket mounting screws with the appropriate left rear
Before
Figure 4.16 Installing the left rear bracket
2. Press and hold the release catch identified in the "Before" image of
| 40 |
rack post holes as shown in the "Before" image of Figure 4.16.
Release
catch
Figure 4.16 and push the bracket into place so that the mounting screws
install securely into the rack post holes.
Chapter 4: Installing the Enclosure Into a Rack
After
CTC-DOC-002293, Rev A.2