Server Module Status; Nic Status; Ethernet Leds - Viking VSS2249RQ User Manual

Server Module Status

Possible server module status LED behavior is exampled in Table 7.8.
Table 7.8 Potential server module status LEDs

NIC Status

The 10GbE ports on the rear of each server module are standard RJ45-style
connector. The self-driven green LEDs indicate link and speed. The amber
LEDs indicate link activity. A close-up of the LEDs is shown in Figure 7.7 on
page 84 and Figure 7.8 below.
Figure 7.8 Ethernet LEDs
The NIC LED functionality is outlined in Table 7.9.
Table 7.9 NIC LEDs
CTC-DOC-002293, Rev A.2
Green Blue
ON OFF
OFF OFF
OFF ON
OFF Blinking ~1 Hz
Left LED
OFF
Amber
Green
Blinking
VSS2249RQ Storage Server User Guide
Amber
OFF
ON
OFF
OFF
Right LED
OFF No link.
Green Link at 100 Mb
Green Link at 1000 Mb
Blinking Indicates Ethernet link activity.
Behavior
The server module has
booted and is operating
normally. A service action is
not allowed.
A server module fault has
been detected.
The server module is being
sent an identify command.
A service action is allowed
Description
| 85 |