Firmware
The VES Online Document Library is maintained on a secure site. Email
customersupport@vikingenterprise.com to obtain the login and password
necessary to access the latest firmware for the VSS2249RQ product
Website Information
The VES Online Document Library is maintained on a secure site. Email
customersupport@vikingenterprise.com to obtain the login and password
necessary to access the documentation for the VSS2249RQ product.
| 138 |
3.3.b.a. Type: Chassis
3.3.b.b. Fastening technique: N/A
3.3.b.c. Tools required: N/A
N/A.
3.3.b.a. Type: Battery
3.3.b.b. Fastening technique: Thumbscrew, lock bar, screws
3.3.b.c. Tools required: Phillips® #1 screwdriver
Unscrew the VSSEP1EC thumbscrew and pull the lock bar
outward and down to release the cam. Slide the VSSEP1EC out
of the enclosure. Remove the screws securing the cover on the
module and remove the cover. If installed, remove the screw
securing the PCIe face plate in the top right PCIe card slot, and
then remove the card from the riser/connector. Remove the
battery. Recycle according to local regulations.
Appendix E: Lot 9: Annex II, 3.2 and 3.3
CTC-DOC-002293, A.2