Advertisement
1. Ensure the ball bearing retainers are located at the front of the left and
2. While facing the front of the VSS2249RQ Storage Server, align the
3. Insert each chassis member rail into the cabinet member rail.
4. Push the enclosure into the rack while pulling the cabinet member rail
5. Press the release tab shown in Figure 4.12 on page 38 and push the
6. Secure the dog ears on the left and right front of the enclosure to the left
7. Installation of the storage enclosure into the rack is complete.
Reinstalling the FRUs
Once enclosure rack installation is complete, return the FRUs that were
removed earlier to minimize weight back to the enclosure.
DRIVE CARRIER ASSEMBLIES
The following instructions guide the user in reinstalling the drive carrier
assemblies.
1. Ensure the release handle is in the open position as shown in Figure 4.3
| 42 |
right cabinet member rails. This is followed by an audible click.
enclosure both horizontally and square to the rails.
until the cabinet and chassis member rails lock into the serviceable
position. This is accompanied by an audible click.
enclosure fully into the rack.
and right front rack posts using the two M5 X 9 shipping screws.
NOTE: The rail kit supports rail depths between 27 inches (68.6 centimeters) and 37
inches (94.0 centimeters). The rack envelope is 39.4 inches (1 meter).
ESD-SENSITIVE DEVICE. Only install the device on a properly grounded electrostatic
discharge (ESD) protection surface to avoid damage to the components. Always utilize
a properly grounded ESD wrist strap or mat during operation or installation of the
device, or when connecting the cables.
CAUTON: Ensure that the SSDs have had a minimum of two hours to acclimate to
room temperature prior to their installation in the enclosure.
CAUTION: Due to thermal considerations, all 24 drive bays must be populated with
drive carrier assemblies containing SSDs or drive blanks to maintain proper cooling.
on page 32.
Chapter 4: Installing the Enclosure Into a Rack
CTC-DOC-002293, Rev A.2
Advertisement
Chapters
