Required Tools
Removing the Optional Bezel
Drive access or enclosure extension on the rails requires the removal of the
optional front bezel. Figure 8.2 shows a rendering of the optional bezel design.
Figure 8.2 Optional bezel
Bezel Removal
1. Slowly pull the bezel partially out of the left side of the left rack ear. The
CTC-DOC-002293, Rev A.2
Phillips screwdriver (drive replacement only)
stud will release from the retention clip inside the left side of the bezel
cover. Refer to Figure 8.3 on page 96.
VSS2249RQ Storage Server User Guide
| 95 |