Advertisement
CTC-DOC-002293, A.2
Unscrew the VSSEP1EC thumbscrew and pull the lock bar
outward and down to release the cam. Slide the VSSEP1EC out
of the enclosure. Remove the screws securing the cover on the
module and remove the cover. Press the release tabs to the left
and right of the first DIMM, and then lift the DIMM out of the
canister. Repeat for each DIMM. Recycle according to local
regulations.
3.3.b.a. Type: Processor
3.3.b.b. Fastening technique: Thumbscrew, lock bar, screws
3.3.b.c. Tools required: Phillips® #1 and Phillips #2 screwdrivers
Unscrew the VSSEP1EC thumbscrew and pull the lock bar
outward and down to release the cam. Slide the VSSEP1EC out
of the enclosure. Remove the screws securing the cover to the
module and lift the cover off. Use the Phillips #2 screwdriver to
remove the screws securing the heat sink to the processor.
Unscrew the ILM and lift up on the load plate to expose the
CPU. Lift the CPU out of the socket. Recycle according to local
regulations.
3.3.b.a. .Type: Motherboard
3.3.b.b. Fastening technique: N/A
3.3.b.c. Tools required: N/A
Data storage product does not have a motherboard.
3.3.b.a. Type: Expansion card/graphic card
3.3.b.b. Fastening technique: Thumbscrew, lock bar, screws
3.3.b.c. Tools required: Phillips® #1 screwdriver
Unscrew the VSSEP1EC thumbscrew and pull the lock bar
outward and down to release the cam. Slide the VSSEP1EC out
of the enclosure. Remove the screws securing the cover on the
module and remove the cover. If installed, remove the screws
securing the PCIe face plates in the four PCIe card slots, and
then remove the cards from the risers/connectors. Recycle
according to local regulations.
3.3.b.a. Type: PSU
3.3.b.b. Fastening technique: Release tab
3.3.b.c. Tools required: None
Press up on the release lever on the bottom of each power
module and pull the module out of the slot by the finger pull.
Recycle according to local regulations.
VSS2249RQ Product Safety Guide
| 137 |
Advertisement
Chapters
