the cables for the server and PM on the right side of the enclosure, and the
bottom CMA services the cables for the server and PM on the left.
Figure 3.6 CMA assembly
SERVER MODULE OPERATOR PANEL
The VSSEP1EC Server Module operator panel enables the following tasks to be
completed.
| 24 |
Refer to the section titled "Cable Management Hardware" that begins on page 45
of Chapter 4 for CMA installation instructions.
Connect to the following ports:
USB Mini-B console port for serial console connection only (not a
charging port)
USB 3.1 Gen 1 (5 Gb/s) type A port
1 gigabit Ethernet (GbE) RJ45 port
Micro HDMI port
Installation of up to two HHHL x16 PCIe® Ethernet add-in cards per
server module provide network ports
CAUTION: The add-in card and prospective slot must be the same form factor.
Chapter 3: Connection and Configuration Options
CTC-DOC-002293, Rev A.2