Separating The Inner And Outer Rails - Viking VSS2249RQ User Manual

Figure 4.10 Installing 7.1-inch screws
3. Proceed to the next section to separate the rails for installation.

Separating the Inner and Outer Rails

Before the rail kit is installed, the inner chassis member rails must be separated
from the outer cabinet member rail.
1. Slide the inner chassis member rail out from the outer cabinet member
Figure 4.11 Removing the inner rail
2. Pull the release tab on the inner chassis member rail forward as
CTC-DOC-002293, Rev A.2
rail until there is an audible click. The rail locks in the serviceable
position as shown in Figure 4.11.
Inner chassis
member rail
"Click"
demonstrated in Figure 4.12 on page 38.
VSS2249RQ Storage Server User Guide
Outer cabinet
member rail
| 37 |