IBM 3745 Problem Determination Manual page 67

Alerts
• Subvector key X'91', basic alert. Contains the alert type code. This code
has three possible values:
X'FC', a permanent loss of availability
X'FO', an impending loss of availability
X'FE', a temporary loss of availability.
• Subvector key X'92', alert description.
Contains the alert 10 number. This is a composite code computed from
certain of the code point values. It does not provides a value by which the
entire NMVT can be recognized.
Notes:
1. Any change, addition, or deletion of the applicable code point values
alters the alert identification number.
2. Each NMVT can be uniquely identified only by the product alert reference
code (alarm number).
• Subvector key X'93', probable causes.
• Subvector key X'94', user causes. Contains:
The cause code points, subfield X'01'.
The action code points, subHeld X'81'
• Subvector key X'9S', installation causes. Contains:
The cause code points, subfield X'01'
The action code points, subfield X'81'
• Subvector key X'96', failure causes. Contains:
The cause code points, subfield X'01'
The action code points, subfield X'81'
Each NMVT has at least one subfield X'82' that contains the product alert
reference code (alarm number). Each NMVT can only be uniquely identified by
this code.
Other X'82' subfields contain values, such as reference code, adapter number,
and line address range.
These subvectors are listed, by product alert reference code sequence (also
known as alarm 10 number) on the following pages.
Related NCP and NetView* Publications
You may refer·to the manuals listed on page xii for more detailed information.
1-50
IBM 3745 Communication Controller: Problem Determination Guide
C '
I, "--" " "
I
o