IBM 3745 Problem Determination Manual page 64

o
o
o
o
o
ALARM D4:IPL OF STANDBY CCU-x COMPLETE WITH ERRORS hhmmss ref code
Cause:
Action:
Non-disruptive errors occurred during the IPL of the standby CCU. The 3745 is running but
if a fallback occurs, there will be some restrictions on the console or disk.
co
and give reference code.
ALARM E1: CP ERROR: CCU-x CP ABEND xxxx RE-IPL REQUEST hhmmss ref code
Cause:
Action:
Control program
• Refer to the appropriate control program documentation (NCP or else) for the abend
code xxx x description.
• Transfer the control program dump to the host and print it. Refer to the NCP, SSP, and
EP Diagnosis Guide.
• Apply the correct software level.
• Check for the correct software fix.
• If unsuccessful,
CO
the software support for NCP and report the CP abend code and
the reference code.
ALARM E2: MICROCODE ERROR: CC;U-x CP ABEND xxxx RE-IPL REQUEST hhmmss ref code
Cause:
Action:
Adapter microcode
• If the problem reoccurs,apply the last microcode and MCF's levels.
• If the prob1em persists,
CO
the hardware support for the 3745 and report the alarm
number and the reference code.
Chapter 1 .. Alarms and Alerts
1.-47