IBM 3745 Problem Determination Manual page 224

o
o
o
o
o
Local! Alternate Console Problems
3
Press Function repeatedly until 4 is displayed, then press Validate.
The remote or RSF console is immediately disconnected.
Console in Use displays 3. .
If the local cons.ole is powered on, the following screen is displayed.
You may log on at the local console.
If the following screen is not displayed:
Be sure that the console setup is well done, refer to the 3745 Console Setup
Guide.
Otherwise,
CO
----------------- ------------------------------------- mm/dd/yy hh :mm
CA INTERFACE DISPLAY
INTERFACE CHANGE E/D INTERFACE HOST OR CHANNEL NSC
NUMBER E/D REO REQUEST STATUS SWITCH UNIT ADDRESS ADDRESS
1A
2A
3A
4A
5A
5B
7A
SA
==>
==>
E ENABLED
D DISABLED
o
DISABLED
46
41
42
- TYPE E OR 0 TO CHANGE THE ENABLE/DISABLE REQUEST. THEN PRESS SEND
F4:MOSS FUNCTIONS F5:UPDATE
Chapter 6. Local or Alternate Operator Console Problems
6-11