IBM 3745 Problem Determination Manual page 240

o
o
o
o
o
Link-Attached 3745 Load Problems
Looking- at the host console:
If
V
The IPL link cannot be activated at the
host.
During the remote loading/activation
procedure, the following VTAM*
message is displayed at the host
console:
IST5481 SOFT INOP FAILED ...... .
IPL Problems (Link-Attached)
Do
• Check if there is an alarm on the
local 3745 related to the problem. If
there is, perform the action requ ired
for the alarm (see Chapter 1).
• Check if the local modem is
powered on and operational. For
example, not in test mode.
• Check the modem cable to the L1C.
(Correct cable group or part nu mber,
and plugged in at both ends.)
Refer to: .. Program Abend on a Remote
Controller" on page 8-12 and to the
3720/3745 Remote Loading/Activation
Guide, SA33-0161 for detailed
information.
Chapter 8. IPL Problems (From Host or Disk)
8-5