IBM 3745 Problem Determination Manual page 230

o
o
o
o
o
Looking at the remote console:
If
One of the following messages is
displayed:
COMM NOT READY 2
LINE CHECK 2
SENDING
(on a 3153/3161)
(on a
3727)
(blinking on an)
(IBM PC
or
PSl'2*)
The clear key is pressed by accident or
a typing error is entered, several things
can happen. The screen could clear, or
the information could be partially
displayed and the message not
readable.
l~_N_o_n_e
__ o_f_t_he __ a_b_o_v_e_a_p_p_l_ie_s_. ____________
J
Remote Console Problems
Do
Reestablish the phone connection and
log on at the remote console, if you
cannot log on or if the problem persists,
contact the local operator.
[ I
SEND)
twice to refresh the screen.
• Be sure that the console setup is
well done, refer to the 3745 Console
Setup Guide.
• Perform the problem determination
described in the operator console
docu mentation.
• If the problem persists:
fQ
Chapter 7. Remote Operator Console Problems
7 .. 5