IBM 3745 Problem Determination Manual page 301

LIC Messages (LIC6)
The following
Lie
messages are displayed on the PKD. The cause and the recommended corrective
action are given. The corrective actions should be performed step by step until the error is cleared.
CHECK CON FIG
Cause: Local LlC error.
Action:
• Check the local configuration.
• Reconfigure if necessary, see the 3745 Connection and Integration Guide.
• Press the EXIT key to return to the background display.
CONFIG MISMATCH
DDS OOS OOF
Cause: Local LlC and remote modem configuration error.
Action:
• Check the local configuration (in particular, that the correct DDS or LDM mode has been
selected) see the 3745 Connection and Integration Guide.
• Reconfigure if necessary.
• Ask the remote operator to check the remote configuration.
• If the problem persists, check if the remote modems are displaying warning messages.
• Press the EXIT key to return to the background display.
Cause: The network is not operational, or there is a remote modem or line fault.
Action:
• Call the network manager and ask if the network is operational.
• If the network- is operational, ask the remote host operator to perform the remote modem
self-test.
LOC MODEM ERROR
Cause: Faulty local LlC.
Action:
• Verify that the telecommunication wrap plug is correctly plugged in.
• Repl ace .the local L1C.
• Perform steps 6 and 7 on page 9-46.
• Press ·the EXIT keY' to return to the background display.
9-50
IBM 3745 Communication Controller: Problem Determination Guide
o
o